For more information, please see full course syllabus of Differential Equations

For more information, please see full course syllabus of Differential Equations

## Discussion

## Study Guides

## Download Lecture Slides

## Table of Contents

## Transcription

## Related Books

### Linear Equations

Lecture Slides are screen-captured images of important points in the lecture. Students can download and print out these lecture slide images to do practice problems as well as take notes while watching the lecture.

- Intro
- Lesson Objectives
- How to Solve Linear Equations
- Calculate the Integrating Factor
- Changes the Left Side so We Can Integrate Both Sides
- Solving Linear Equations
- Further Notes
- If P(x) is Negative
- Leave Off the Constant
- The C Is Important When Integrating Both Sides of the Equation
- Example 1
- Example 2
- Example 3
- Example 4
- Example 5
- Example 6

- Intro 0:00
- Lesson Objectives 0:19
- How to Solve Linear Equations 2:54
- Calculate the Integrating Factor
- Changes the Left Side so We Can Integrate Both Sides
- Solving Linear Equations
- Further Notes 6:10
- If P(x) is Negative
- Leave Off the Constant
- The C Is Important When Integrating Both Sides of the Equation
- Example 1 10:29
- Example 2 22:56
- Example 3 36:12
- Example 4 39:24
- Example 5 44:10
- Example 6 56:42

### Differential Equations Online Course

### Transcription: Linear Equations

*Hi and welcome to the differential equations lectures here on www.educator.com.*0000

*My name is Will Murray and I’m very glad that you are going to be joining me, today we are going to start right away with linear equations, that is that first topic of differential equations.*0004

*There is a special algorithm on that and we are going to learn to solve them, let us jump right in.*0015

*We are going to learn how to solve linear differential equations, the way you recognize a linear differential equation is that you can put it in this form Y′ of x + p(x) × y(x)=x ^{3}.*0020

*You might be using different variables like you might have a (t) instead of (x), that is ok the methods are exactly the same.*0034

*I want to make a couple of notes about the form here, the word linear does not necessarily mean what you think it would mean.*0042

*You can still have lots of functions in here that are not linear, linear means that we think of y and Y′ as the variables, not x and y.*0053

*But you think of y and Y′ as the variables and you think of the p(x) and the x ^{3} even though they are functions of (x), you think of those as being the coefficients.*0061

*They might be something like cos(x) or e ^{x} or anything like that, but the point is you think of those as being coefficients.*0072

*If you look at this equation, the linear form is (Y′) + p × y =q, if you think of y and Y′ as the variables and you think of (p) and cubed being coefficients then what you have there is a linear function in terms of Y′ and (y).*0079

*That is what we mean when we talk about a linear differential equation.*0103

*If you have something in front of the Y′(x), if you have a coefficient right here, the solution method that we are going to learn in the next slide does not work until you get rid of the coefficient.*0109

*What you have to do is divide both sides by that coefficient to get rid of it and give your self a nice, clean Y′(x) with no extra coefficient.*0123

*Make sure to divide any coefficient here in front of the Y′ before we start the algorithm that we are going to learn on the next slide.*0133

*Divide away any coefficient here first, that is a very common mistake that some of my own students make when I teach them differential equation.*0150

*I will give them an equation where I have a coefficient here and they will go through and use the algorithm that we are about to learn but it would not work because they forget to divide that coefficient away.*0162

*Let us start to learn that algorithm, how you solve linear equations is you calculate something called the integrating factor which means you look at the coefficient of the y(x) which is the (p).*0172

*You look at the p(x) and you integrate it, you take its integral and you raise (e) to that power.*0186

*So it is e to the integral of p(x) and we call that the integrating factor i(x) and we multiply that by both sides.*0194

*A lot times this makes the equation get a lot more complicated, let me show you why we want to do that.*0202

*What we have here on the left hand side, we have i(x) × Y′ and then here we have y × a very large mess but what this mess turns out to be is the derivative of i(x).*0210

*When you take the derivative of something, the derivative of (e) ^{u}, d by d (u) of (e)^{u} is just (e)^{u} × the derivative of (u).*0231

*Let me just write d of e ^{u} is e ^{u}, d(u).*0247

*What we have is that is the e ^{u} right there, this is the derivative of that (u) because the derivative of the integral of p(x) is equal to the original p(x).*0256

*That sounds a little complicated, I think it will make a lot of sense after we jump in to some more examples.*0273

*Do not worry about it too much right now, the important thing is to notice that we have i(x) × Y′ and (i)prime(x) × Y.*0278

*If I write it this way (i)Y′ + (i)′ (y), that exactly what we would have gotten if we have taken the derivative of (i) × (y) using the product rule.*0290

*We are really exploiting the product rule from calculus 1 to solve this kind of differential equation.*0300

*What that means is you can integrate both sides, when you integrate both sides you can get i(y) on the left and whatever you get on the right.*0308

*The point is we are going to take it from there and we are going to solve for (y).*0318

*I think this will make more sense after we do some examples, so if it is still a little fuzzy right now, do not worry because we will work through some examples together and you will definitely get the hang of it.*0322

*As I said from the previous side, after you integrate both sides, you are going to get i(x) × y(x) × y on the left.*0333

*Remember I said you will get i(y) on the left and you will get whatever you get by doing this integration on the right.*0341

*You can then solve for y(x) by diving both sides by this i(x).*0350

*That is the plan for these differential equations, after we do some examples I think it will be a lot more clear.*0357

*There are couple of notes that I want to make before we jump in into some examples, let me just remind you of the original form we are solving here.*0367

*Y′ + p(x), (y) is equal to q(x) that is the form that we are solving.*0377

*If p(x) is negative, meaning if you have a negative sign right there, you want to make sure to include that when you are finding i(x), that is a very common mistake that my students often make when I’m teaching differential equation.*0386

*Remember that the integrating factor i(x) is e to the integral of p(x) d(x).*0398

*If there is a negative sign here, then that is a part of the p(x) and you have to include that in here, but a lot of people do not notice that negative sign and they forget to include it.*0408

*Trust me that will really ruin all the calculations after that, make sure you include the negative sign.*0418

*Another related mistake that is very common is resolving this e to the integral.*0425

*A lot of times when you take the integral you get the natural log or something, my students sometimes see e to the –natural log or something, I wrote cucumber here, e to the -natural log of cucumber.*0433

*My students will say “oh I know that e and natural log cancel each other out, so e to the- natural log of cucumber is just –cucumber”.*0444

*That is wrong, let me and let me show you why it is wrong.*0453

*If you have e to –natural log of cucumber, then that is really the same, remember the rules of natural logs as e to the natural log of cucumber to the -1 power.*0456

*The rules of natural logs say you take the numbers on the outside and they turn into the exponents.*0476

*That is e to the natural log of cucumber ^{-1} which is 1/cucumber, which is just 1/cucumber.*0481

*That is a very common mistake that I see students make all the time, they want to cancel (e) and natural log but they do it so quickly that they do not notice that negative sign is in there.*0496

*They just try to pull that negative sign outside, it does not work, this is how it works out as 1/cucumber, you got to be really careful about stuff like that.*0508

*Another note that I want to make is that when you are doing this integral to find the integrating factor, (e) to the integral of p(x), you can leave off the constant there.*0518

*It does not really matter if you add an arbitrary constant or not, you might as well leave it off, you do not have to worry about the constant there.*0526

*However, later on in the problem when you are integrating both sides of the equation, the constant is very important, I can not stress this enough, I need to highlight that part right there.*0535

*The constant is very important when you are integrating both sides of the equation and it is also very important that you do it exactly at the moment when you do the integration.*0546

*When you do the integration that is when you have to add the constant.*0556

*The reason you have to be so careful about that is after you do the integration, you usually have to do a couple more steps of algebra to solve for (y).*0560

*You have to keep track of that constant as you go through those algebraic steps, sometimes that constant gets tangled up in the equation.*0570

*This is a very big difference from when you first learned how to do integrals back on calculus 2 or even in calculus 1.*0578

*You could do the whole problem and then just hack on an arbitrary constant at the end.*0588

*You could even do 5 problems and at the end you just go back and put +c in every single one of them.*0591

*That does not work in differential equations, you have to add the constant in the middle of the problem when you do the integration step and then keep track of it after that.*0598

*If you just go back at the end and tack on a constant at the end, you will get the wrong answer.*0608

*I think you will see in some examples how that plays out but let us just remember to add the constant exactly when we do the integration.*0615

*Let us jump in with an example now, we are going to find the general solution to the following differential equation Y′ + xy=x ^{3}.*0630

*Let us remember the strategy here, our generic form for a linear differential equation is Y′ + p(xy)=q(x).*0639

*That is what we have got here, we got Y′ + a function × (y)=another function.*0652

*The strategy here is to find the integrating factor i(x)=e to the integral of p(x) (dx), that is always our strategy for linear differential equations.*0658

*In this case, the p(x) is that (x) right there, so that is the (p), and we have to do (e) to the integral (x)(dx) and that is just e to the x ^{2}/2, the integral of (x) is x^{2}/2.*0674

*When you are doing this integration to find i(x), you do not have to worry about the constant here, so no (+c) necessary at this integration.*0690

*I’m misspelling necessary here, no (+c) necessary at this step, later on there is going to be another step where we are going to do integration.*0704

*At that point it is going to be absolutely crucial to include the (+c).*0715

*What we do with this integrating factor is that we multiply it by both sides of the equation, so I’m going to multiply e to the x ^{2}/2 × Y′ + I’m going to write this in the middle.*0720

*(xe) to the x ^{2} /2 × Y= x^{3} e to the x ^{2}/2.*0735

*The whole point of this linear equations and this integrating factor strategy is that this left hand side is supposed to be the derivative of y × i(x) using the product rule, let us look at that.*0746

*I’m saying that this is the derivative of y × e to the x ^{2}/2, that was our i(x), it is supposed to be the derivative of that using the product rule.*0761

*It is always good to check at this step that it worked, if we took the derivative of (y)e to the x ^{2}/2, we get Y′(e to the x^{2}/2).*0772

*(y) × the derivative of e to the x ^{2}/2, which is e to the x^{2}/2 × (x).*0783

*That right there is i(x), I′(x) and that right there is i(x), we do get something that looks like the aftermath of the product rule.*0790

*That confirms that we did our work correctly and this is still equal to x ^{3} e to the x^{2}/2.*0805

*We are going to have to solve this and the way we are going to that is by integrating both sides, if I integrate the left hand side, I have the derivative so I’m going to go (y) e to the x ^{2}/2.*0816

*That is by integrating both sides is equal to the integral of x ^{3} e to the x^{2}/2 (dx).*0831

*Now I have to solve that integral on the right, I think I have to take another side to do that because it is not the easiest integral in the world.*0843

*Let me just recap what happened on this side here, we started out with this linear differential equation in this form Y′ + p(xy)=x ^{3}.*0850

*Our strategy for linear differential equation is to form this integrating factor where you do e to the integral of p(x).*0861

*P(x) is just (x) and its integral is x ^{2}/2, we do not have to add a constant for that integral.*0869

*We multiply that by both sides, so we multiply that by all three terms here.*0876

*The point is that makes the left hand side into i(x) × Y′ + I′ (x) × (y), we get a product rule going on and that is the derivative of (y) × i(x).*0882

*If we integrate both sides, on the left hand side we just get y × i(x), on the right hand side we have an integral that we still need to solve.*0895

*That is what I’m going to carry over on to the next slide and we will keep going there.*0903

*We still have a couple of steps to go on example 1 here, we had on the previous side y × e to the x ^{2}/2 was equal to the integral of x^{3} e to the x^{2}(dx).*0910

*We have to solve that integral and what I’m going to do is make a little substitution here, I’m going to do (u)=x ^{2}/2 and then my (du) would be equal to 2x/2, just x(dx).*0930

*I’m going to write this integral as, I think I’m going to take that x ^{3} and write it as x^{2} and will give me another (x) to put over here with the (dx).*0949

*This is e ^{u} and now x^{2} is 2 × (u), so I’m going to pull out 2 out here and change that x^{2} to a (u), e^{u} and x(dx) is (du).*0961

*I still need to do integration by parts to solve (ue) ^{u}, let me set up integration by parts to solve (ue)^{u}.*0976

*I have a little short hand technique for integration by parts, it is called tabular integration.*0986

*I thought this on some earlier educator videos for the calculus 2 or calculus BC series.*0991

*If you go back and look at those calculus BC lectures here on www.educator.com, you will see a section for integration by parts.*0998

*That is where I thought this section on this trick for tabular integration to do integration by parts quickly.*1007

*What I’m going to do is take derivates of (u), derivative of (u) is 1 and derivative of 1 is 0, then I’m going to take integrals of e ^{u}, that is just e^{u} and e^{u} again.*1014

*Then I write little diagonal lines here and put alternating signs positive, negative down the diagonal lines.*1028

*Then I just multiply down the diagonal lines, I still have a 2 on the outside and I have (u)e ^{u} - e^{u}, that is still equal to (y)e to the x^{2}/2.*1035

*I want to really emphasize something right here, this is the step where I did the integration and this is where I have to put a (+c), that is really crucial here, I will put a (+C) right now.*1051

*Let me really emphasize that, must add (c), we can not just add (c) at the end, so we must add (+c) when we do the integration, not earlier and not later.*1064

*The reason we have to do it then is because the next step is to solve for (y) and that is going to involve some algebra that will going to change the equation around a little bit.*1092

*And the (c) is going to be tangled up in with that algebra and we need to let that happen, we can not just tack it on at the very end when we are all done.*1102

*What we have here is I need to get things back in terms of (x), 2 × (u) is x ^{2}/2, e to the ^{2}/2 – e to the x^{2}/2 + (c).*1110

*I would like to divide both sides by e to the x ^{2}/2 because I want to solve for (y) on the left.*1133

*If I divide both sides by e to the x ^{2}/2, I’m just going to get 2 × in the inside here x^{2}/2 – 1 + (c).*1140

*Now dividing by e to the x ^{2}/2 is the same as multiplying by e to the –(x)^{2}/2.*1153

*I get (y) is equal to, if I distribute that 2 I get x ^{2} - 2 + a constant × e to the –x^{2}/2.*1161

*That as far as I can take this one, I’m going to stop there, that is called a general solution right there.*1173

*The general solution always has an arbitrary constant somewhere in it and the way you would find the value of that arbitrary constant will be the U’s initial conditions if you were given an initial condition.*1179

*In this case, we are not given an initial condition, we can not find the arbitrary constant, so U’s initial condition if given.*1191

*In this case, we are not given one to find the exact value of (c) and if you do not have an initial condition then you just leave it in terms of the general solution like what I did here.*1209

*What we really found here is the general solution, that as far as we can take it on this one.*1225

*The next example we will have an initial condition and you will see how we are going to plug that in the end to find the value of (c) but in the mean time let us go back over what happened with this example.*1236

*This is the integral that I got from the previous side, this is all work that we did on the previous side, you can check back on the previous side if you do not remember where this all came from.*1247

*We solved it to the point of getting (ye) to the x ^{2}/2 is equal to this integral and this is a slightly messy integral so I made a little substitution.*1259

*(u)=x ^{2}/2, of course I have to make my d(u) as well and then because I have an x^{3} here, I factor that in to x^{2} and an (x).*1266

*The point of that was I want to segregate out an (x) to be my d(u) here, so that x(dx) became the d(u).*1278

*That x ^{2} is 2 × (u), that gave me a 2 and a (u) here, we have e^{u}.*1283

*Just to do (ue) ^{u} I have to do a little integration by parts problem.*1294

*I have this tabular integration method that I covered back in my lectures in the calculus BC section here on www.educator.com.*1299

*You do derivatives of (u), so this are derivatives and integrals of e ^{u}, we do integrals.*1308

*You cross multiply them along with these little alternating signs plus, minus, plus and so we get (ue) ^{u} - e^{u}, substitute back in (u) as x^{2}/2.*1316

*We are trying to solve for (y) that means I have to divide both sides by e to the x ^{2}/2.*1331

*That is what I did here, I cancelled off my e to the x ^{2}/2 here and here.*1338

*Now with the (c), I have to multiply by e to the –x ^{2}/2, that is the same as dividing by e to the x^{2}/2.*1342

*I just distributed this 2, cancelled of the ½ and we got x ^{2} - 2 + (c)e to the –x^{2}/2.*1350

*At this point, if you had an initial condition, you would use it now to figure out the value of that arbitrary constant.*1359

*If you do not have an initial condition which is what happened with this problem, you will just stop and you say that is your general solution.*1366

*In example 2, we have to find the solution to the following initial value problem cos(XY)′ + sin(xy)=cos(x ^{5}) sin (x), and the initial condition is y(0)=2.*1377

*Let me remind you the format for linear differential equation, it has to be in this form (Y)′ + p(xy) is equal to q(x), it got be in that form.*1390

*In particular, it is not allowed to have anything, any coefficient in front of the Y′, here we do have a coefficient in front of the Y′, we have cos(x).*1403

*What we are going to do is divide both sides by that cos(x) to get it into the required linear form, we get Y′ and we are going to divide by this.*1414

*We got to divide both sides here so I get Y′ + sin(x)/cos(xy), now if I have cos ^{5} on the right and I divide by 1 cos, it will go down to cos^{4}(x) sin (x).*1427

*I’m not going to worry about the initial condition because paradoxically you use the initial condition at the very end of the problem, we would not worry about that for quite a long time.*1445

*Let us remember our general strategy for linear differential equations which is that you use this integrating factor i(x) is equal to e to the integral of p(x) d(x).*1454

*In this case, my p(x) is the coefficient of (y) so that is p(x) right there.*1470

*By the way, you could rewrite this as tan(x) if you wanted, I do not think that is going to be useful for what is coming up.*1475

*I do not think there is any particular benefit for writing this as tan(x) but it would not be wrong, that is the p(x) right there.*1483

*What we get here is the integrating factor i(x)= e to the integral of p(x), so e to the integral of sin(x)/cos(x)d(x).*1494

*In order to integrate that, I think I want to do a little substitution, of course you could remember what the integral of tan(x) is.*1508

*Certainly that would be great if you did remember it, but I’m not going to assume that you remember it because we are going to solve that just with a little substitution.*1515

*We are going to use (u)=cos(x) and then d(u) would be –sin(x)d(x), this is (e) to the integral of, there is a negative sign there so I have to put –d(u).*1523

*d(u) is sin(x) d(x) with a negative, cos(x) is (u), e to the negative integral of d(u)/(u) and that is e to the –natural log of (u), which is e ^{-natural log of u} is cos(x).*1541

*Now a couple of points to mention here, first you do not have to add the arbitrary constant when you are finding the integrating factor.*1559

*You can omit the (+c) at this point, it is ok, later on it will be very important to add on that arbitrary constant when we do another step of integration later, but here you do not have to worry about it.*1567

*Next thing to be very careful about is, let me write this in red to show that it is wrong.*1580

*A lot of my students would look at this and say this is equal to e to the- natural log of cos(x), the e in the natural log is cancel so this is just –cos(x).*1587

*That is wrong, I want to make it clear that you do not want to do that, instead what you want to do is you write that as e to the natural log of cos(x) ^{-1}.*1596

*Remember that negative becomes an exponent.*1614

*That is just cos(x) ^{-1} which is 1/cos(x), that is the actual integrating factor, that is also the same sec(x).*1617

*That is the integrating factor not –cos(x), that would have really stirred you wrong.*1637

*Let me go back to the original equation here, we have Y′ + I think I’m going to write it as tan(x), tan(xy)=cos ^{4} x sin(x).*1642

*Remember the point of the integrating factor is you are going to multiply both sides by that integrating factor, so multiply both sides by sec(x).*1658

*We will get sec(x) Y′ + sec(x) tan (xy) is equal to, now remember sec(x) is 1/cos(x), we are really dividing by a cos(x).*1667

*We will go down to cos ^{3}x sin(x) and the point of that is that the left hand side is exactly what you would have gotten if we have taken the derivative of sec(x) × (y) using the product rule.*1684

*The product rule says derivative of 1 × the other, the derivative of other × 1 and that would have given us sec(x) × Y′ and then the derivative of sec is sec(tan) × (Y).*1708

*That is exactly what we have gotten with the product rule, have we taken the derivative of sec(x) × (y).*1723

*The product rule suppose to work for every linear differential equation that is the whole point of this, this is still equal to cos ^{3}x sin(x).*1731

*We are going to integrate both sides here, and on the left that means we are going to get sec(x) just × y without the derivative because we integrated the derivative, we just get back to the original function.*1744

*On the right we still have the integral of cos ^{3}x sin(x) d(x) and we have to wrestle with that integral.*1758

*I think I’m going to go ahead and work that out on the next slide, let me remind you what happened on this slide.*1769

*We had this differential equation here but it is not quite in perfect linear form and the reason it is not in perfect linear form is because of this coefficient in front of the Y′.*1777

*We are not supposed to have anything in front of the Y′ except for a 1, we have to divide a way by that cos(x) so that is why I divided the cos(x) in front of the Y.*1789

*I got sin(x)/cos(x) and cos ^{5} went down to cos^{4} because I divide by cos, we got this new formula in differential equation and that is in linear form.*1800

*We can use our generic linear strategy which is to use this integrating factor which means you look at the p(x) and you try to integrate it and you raise e to that power.*1812

*To integrate sin(x)/cos(x), I use a little (u) substitution, (u)=cos, d(u)=-sin, so we got –d(u)/u which gave me –natural log(u).*1827

*I did not have to add (+c) here, that is going to come later on, the –natural log(u) substitutes back to –natural log of cos(x).*1839

*It is very tempting at this point and it is something that students often do is to try to cancel the e in the natural log.*1849

*But it does not work because of that negative in between them, you have got to turn that negative into an exponent first then you can cancel off the (e) in the natural log.*1856

*You will get 1/cos(x) or sec(x) as your integrating factor.*1866

*The point of that was you multiply both sides of the equation by that integrating factor that is what I’m doing here.*1871

*On the left I get sec(x) × Y′ + sec(x) tan(x) × y and the point of that is that it is the derivative of sec(x) × y using the product rule.*1877

*If you use the product rule and expand this out you get exactly these two complicated terms.*1889

*On the right hand side when I multiply by sec(x), that is like dividing by cos(x), I got cos ^{3}x × sin(x).*1896

*I’m still stuck with that, I still have to integrate that, that is why we are going to jump over on the next slide and keep going.*1904

*On the previous side, we got it down to sec(x) × (y) was equal to the integral of cos ^{3}x × sin(x), this is all coming from the previous side here (dx).*1912

*I have to solve this integral on the right, I’m going to use a little substitution now, u=cos(x) and my d(u), we always have to find the d(u) when you do a substitution.*1928

*D(u) then would have to be –sin(x) d(x) and I have the integral of u ^{3} and that sin(x) should be negative.*1938

*I will put negative out here, -d(u), that is –u ^{4}, using the power rule over 4.*1949

*I just did my integration, now is when I have to add a constant, it is very important that I add it right now, -u ^{4}/4, which is -1/4 × changing (u) back to cos(x), this is cos^{4}x + the constant.*1959

*This is still equal to sec(x) × (y), now I want to solve for (y), I want to divide sides by sec(x), that is the same as multiplying by cos(x).*1983

*I will multiply both sides by cos(x) to cancel off my sec and on the left I will just get (y) and on the right I will get -1/4 cos ^{5}x + (c) × cos(x).*1995

*That is why we had to add that (c) is because the algebra that we do afterwards to solve for (y) starts to tangle up the (c) into the equation here.*2011

*If we did not have an initial condition, we have been done because what we found right here is the general solution.*2021

*But this time we have an initial condition, y(0)=2 and we are going to use that here, y(0)=2, I’m going to plug in 2 for (y) and 0 for (x) -1/4 cos ^{5} of 0 + (c) × cos(0).*2027

*Cos(0) is 1, 2 is equal to ¼ + (c) and my (c) if I move that ¼ over the other side, 2 + 4 is 9/4.*2046

*I’m going to plug that back in to my general solution right there and I get y=-1/4, cos ^{5}x + 9/4 cos(x).*2058

*That is my complete solution to the original initial value problem, it solves the differential equation and it matches the initial condition.*2076

*Let me remind you of the steps here, it was on the previous side where we got this down to the point of having sec(x) × (y)= the integral of cos ^{3}x sin(x).*2087

*To solve that integral we used a little (u) substitution, (u)=cos(x), du=-sin(x), because of that negative, that is where that negative comes from.*2100

*Then we get an easy integral of u ^{3}, that means u^{4} + a constant, on the left hand side I have this sec(x) × y.*2108

*To solve for (y), I’m going to divide by sec(x), that is the same as multiplying by cos(x), I multiplied both sides by cos(x), that is why this 4th became a 5th here and the (c) got multiplied by cos(x).*2119

*Now I use my initial condition here, plug in 0 for (x) and 2 for (y), so 2 is -1/4 cos ^{5}0 + (c) cos(0).*2134

*Cos(0)=1, 2=-1/4 + a constant, move the ¼ to the over other side I get (c)=9/4 then I take that and I plug it back in to my general solution right here, that is where I get y=-1/4 cos ^{5}x + 9/4 cos(x).*2145

*Example 3, we are given a linear differential equation and we are just asked to find the integrating factor.*2173

*We do not have to solve this one all the way through, what we have to do here is just find the integrating factor.*2178

*Remember the general form for linear differential equation though is Y′ +p(xy)=q(x).*2187

*In particular, you are not allowed to have anything in front of the Y′, any coefficient here, we do have a coefficient right here, x+ 1.*2197

*What I’m going to do is divide that away, I’m going to go Y′ – 1/x + 1y=1/x + 1 × sin(x).*2206

*The way you find the integrating factor, you do (e) to the integral of p(x)(dx), the p(x) here is whatever in front of the Y and the key thing here is do not forget the negative sign.*2223

*The negative is part of it, so that is all p(x) right there, this is e to the integral of -1/x + 1(dx), now that is (e) to the -, now the integral of 1/x + 1 is the natural log of x + 1.*2237

*You do not have to worry about a constant when you are finding the integrating factor.*2261

*You can not cancel the (e) and the natural log because there is a negative sign in between them so you have to write (e) to the natural log of x + 1 ^{-1}.*2266

*Now you can cancel the (e) in the natural log, you will get x + 1 ^{-1} and that is just the same as 1/x+1.*2278

*That is all we are asked to do for this example, is to find that integrating factor and we found it, we are done.*2291

*Let me go over those steps one more time, the key thing here is I remembered the generic form for a linear differential equations.*2299

*It got to be Y′ + p(xy)=q(x) and that only works if the coefficient of Y′ is 1.*2307

*Here, the coefficient of Y′ was x+1, I just divide it away, I just divided both sides by that, that is how I got it into this form Y′ -1/x + 1y = 1/x + 1 × sin(x).*2314

*Whatever that is in front the Y is your p(x) but you got to include that negative sign.*2330

*I plugged that into my generic integrating factor formula including the negative sign and that is an easy integral.*2337

*The integral of 1/x + 1 is just natural log of x + 1, but there is still that negative sign so I can not cancel the (e) and the natural log yet.*2343

*Instead I make that -1 in to an exponent and now I can cancel the (e) and the natural log, I end up with just 1/x + 1.*2351

*In example 4, we are given a linear differential equation sin(XY)′ – cos(xy)=x ^{2} and we want to find the integrating factor i(x).*2366

*Let us remember our generic form for our linear differential equation, Y′ + p(xy)=q(x).*2377

*In particular, you can not have any coefficient in front of the (Y)′ so we got this sin(x) here, we got to get rid of it by dividing that away.*2387

*Divide that and get Y′ – cos(x)/sin(x), y=x ^{2}/sin(x), and now I can use my form for the integrating factor which is i(x)=e to the integral of p(x)(dx).*2397

*That p(x) means whatever in front of the y but it includes the negative sign so go ahead and put that in there (e) ^{cos(x)/sin/(x)(dx)}.*2424

*To solve that integral, I could think of that as cot(x) but I do not think that is particularly useful here, what I’m going to do is a little substitution.*2438

*I’m going to use (u)=sin(x) and d(u) is –cos(x)(dx), (du) is just positive cos(x) because the derivative of sin is +cosine, I was looking ahead at my negative sign there but the derivative of sin is just +cos.*2449

*We have (e) ^{-integral of (du)/u}, that negative sign stays there but the integral (du)/(u) is –natural log(u).*2481

*That is (e) ^{-natural log(u)} was sin(x) and we got this negative sign in between the (e) and the natural log, I can not cancel.*2499

*A lot of students are very tempted to cancel the (e) and the natural log and say “that is –sin(x)”, but it is not.*2511

*Instead, you use that negative and make it into an exponent that is (e) ^{natural log(sin x) to the -1}.*2518

*Now you can cancel the (e) and the natural log, you got sin(x) ^{-1} and that is equal to 1/sin(x) which is cosec(x).*2527

*By the way, sin(x) of -1 is not the same as arcsin or inverse sin(x), this is really an exponent so it really means 1/sin(x).*2544

*Be very careful here but this is not the same as sin -1 (x) or arcsin(x), it does not mean the same thing as either one of those, that is another frequent mistake that students make.*2554

*We are done here because we are just asked to find i(x) and we found it, let me recap the steps there.*2570

*We wanted to get the equation into linear form Y′ + p(xy)= q(x), in order to do that, I have to divide away this sin(x).*2577

*I divided away and I get Y′ – cos/sin(y)= x ^{2} /sin(x) and in the integrating factor you do (e) to the integral p(x)(dx), where the p(x) is whatever is found in front of the Y.*2587

*You got to include that negative sign there, that is all p(x).*2601

*To do that integral, I did a little substitution (u)=sin(x), d(u)=cos(x)d(x), we got –(du)/u which is –natural log(u).*2607

*That is substituting back, that is –natural log(sin x) now I can not cancel the (e) and the natural log yet because I still got the negative sign in between them.*2618

*I will make that an exponent and now I can cancel the (e) and the natural log and I will just get sin(x) ^{-1}, that is not the same as inverse sin or arcsin, it is really sin(x)^{-1}.*2627

*That is 1/sin(x) which is cosec(x).*2644

*On example 5, we got to solve the following initial value problem t + 1y′- 3y=t and y(1)=2.*2652

*Let us go ahead and get that into linear form because it is not quite in linear form yet.*2664

*Remember linear form is Y′ + p(t), y=q(t) I have got to divide away that t + 1 to get it in that form.*2670

*I’m going to go Y′ – 3/t + 1y=d/t + 1, I’m not going to worry about that initial condition for quite a long time yet, you do not have to worry about that.*2682

*My integrating factor, that is my strategy for all linear differential equations is (e) ^{integral of p(x)} or p(t) in this is case, which is (e)^{integral of -3/t +1} p(t).*2696

*Remember I got to include the negative sign when I’m finding the integrating factor.*2716

*This is (e) ^{-3 d(t)/t + 1}, I use a little substitution (u)=t + 1, d(u)=d(t), then I just got 1/d(u)/(u), this is (e) ^{-3 natural log (t +1)}.*2724

*This is (e) ^{natural log(t +1) raised to the -3 power}, now I can cancel my (e) and my natural log.*2751

*That is t + 1 ^{-3} which is just 1/(t + 1)^{3}.*2764

*Now the point of that integrating factor is you got to multiply it by both sides of the differential equation.*2776

*We will multiply that by both sides of this form of the differential equation, I get 1/(t + 1) ^{3} × Y′ – 3/(t + 1)^{4} × y= t + 1^{4}.*2785

*The point of that is that this left hand side is always equal to the integrating factor × y if you took their derivative using the product rule.*2811

*It is always a good exercise to check whether that left hand side really is the derivative of i(t) *y*2824

*Because it is a derivative what we can do is integrate both sides and we will get i(t) × y= integral of t/t +1 ^{4} d(t).*2833

*My i(t) remember was 1/t + 1 ^{3} × y = integral of t/t + 1^{4} d(t).*2851

*I have to solve that integral and that looks a little bit unpleasant, there is a nice little trick you can do here, which is (u) substitution.*2867

*(u)=t +1 and then d(u) would just be equal to d(t), I see I’m going to have a (t) in the numerator that I have to deal with.*2873

*That would be t=(u-1), if I solve my substitution for (u), this is equal to the integral of (u-1) × d(u) all over (u) ^{4}.*2884

*I can separate that out in to (u)/(u) ^{4} which is (u)^{-3} - (u)^{-4(du)}.*2901

*Now I can integrate using the power rule, the integral of (u) ^{n(du)}, learned this back in first semester calculus is (u)^{n +1}/n + 1.*2915

*If (n) is -3, (n) + 1 is -2, this is (u) ^{-2}/-2, now (n) is -4, (u)^{-3}/-3.*2929

*I just did the integration, now is the step when I have to add the arbitrary constant, not sooner not later, it got to be right now.*2949

*(+c) here, if I turn that back in to t + 1, I’m going to pull this -2 out and make it -1/2, t + 1 ^{-2} + 1/3, t + 1^{-3} + c.*2957

*This is all equal to 1/t + 1 ^{3} × (y), and now I want to solve for (y) so I’m going to multiply both sides by t + 1^{3} on both sides here.*2984

*On the left I get (y) = on the right – ½, (-2 + 3) is just 1 so, (t + 1) + 1/3.*3004

*T + 1 ^{-3} × t + 1^{3} is just 1 + (c) × (t + 1^{3}).*3020

*I’m going to keep going with this in this next slide so we can solve for the constant but let me remind you what we did in this side.*3029

*I had to get it in this generic linear equation form which means I have to get rid of this coefficient of (t +1).*3037

*I divide both sides with (t + 1) and this was my new form of the differential equation.*3044

*I looked at whatever was in front of the Y and I call that p(t), I have to integrate that.*3050

*I got to integrate -3/(t + 1) that is easy with the (u) substitution, (u)=(t + 1) so I get -3 natural log(u), natural log(t + 1).*3056

*Before I can cancel my (e) and my natural log, I have to take that -3 and turn it into an exponent then I can cancel the (e) and the natural log.*3069

*And I will get (t + 1) ^{-3} or 1/(t + 1^{3}).*3078

*I took that 1/(t + 1 ^{3}) and multiply that by both sides 1/(t + 1^{3}) and that is how I get this line here 1/(t + 1^{3}) Y′, 3/t + 1^{4}y and t/t + 1^{4}.*3081

*The point of that integrating factor, this is always true for all linear differential equations, the left hand side turns in to the derivative of a product.*3106

*It is the derivative of the integrating factor × y, the right hand side you will never going to know what it turns in to but we integrate to undo that derivative.*3116

*We got the integral of the right hand side t/(t + ¼), the i(t) is 1/(t +1 ^{3}).*3126

*On the right hand side I have got to integrate t/(t + 1 ^{4}), my clever idea there is to use (u)=t + 1 and d(u)=d(t), plug that in for (u) here, plug (u -1) in for (t).*3136

*That now separates out into two nice powers of (u), well fairly nice powers of (u), they are negative.*3150

*I just remembered the power rule from calculus 1 here, I plug that in with n=-3, n=-3, and n=-2 on the right and that was the step where I did my integration.*3156

*I have to add a (+c) right at that step then I changed my u’s back to (t + 1) and I just brought this down 1/(t + 1 ^{3}) × y.*3174

*In order to solve that I multiplied both sides by (t + 1 ^{3}) and that is how on the right I got -1/2(t + 1)^{1} and 1/3 (t + 1)^{0} and (c) × (t + 1^{3}).*3187

*We are not done with this yet because we have not yet incorporated the initial condition, what I’m going to do is take this equation over on the next slide.*3202

*We are going to use it to solve the initial condition and then we are going to be done.*3210

*Let me remind you of the equation that we had on the previous slide.*3216

*Our solution so far is (y)=-1/2 × (t +1) + 1/3 + (c) × (t + 1 ^{3}).*3222

*Now I’m going to use my initial condition y(1)=2, I plug in 2 for (y) and 1 for (t), so 2=-1/2 × if (t) is equal to 1 then I will get a 2 there + 1/3 + (c) × 2 ^{3}.*3238

*2=-1 + 1/3 + it looks like it is going to be 8(c) there and if I move that -1 over, I get 3 =1/3 + 8(c).*3261

*If I move that 1/3 over, 3 is 9/3, so 3 – the 3rd is 8/3 is equal to 8(c) and I see I will get (c)=1/3.*3279

*I take that (c)=1/3 and I plug it back into my general solution and I get (y)=-1/2 *(t +1) + 1/3 + 1/3 × (t + 1 ^{3}).*3292

*I can do some algebra here, I could maybe expand out (t + 1 ^{3}), maybe expand out -1/2 (t + 1).*3313

*I do not think it will be dramatically better so I’m going to leave that in that form, I have figure out what my arbitrary constant is, I have solved this as far as it is really useful to go.*3322

*Let me remind you of the steps here, this came from the previous slide, this is our solution from the previous slide.*3338

*But it was not a complete solution yet because we have not incorporated the initial condition.*3344

*We use the initial condition to find the value of the arbitrary constant (c), I’m plugging in from here I get y=2, from here I get t=1.*3349

*I plugged in y=2 there and t=1 in here and here, that is why my (t + 1) turned into two’s, that simplified to -1, 1/3, 2 ^{3} is 8, I just did a little algebra to simply down and figure out that (c) was 1/3.*3361

*I take that and plug it back into the general solution, that is where I got this 1/3, not this 1/3, but that is where I got this 1/3 and the general solution is the arbitrary constant.*3381

*My whole thing turns into just the general solution with the arbitrary constant given the value of 1/3.*3393

*On example 6, we are going to find the general solution to the following differential equation (XY)′ + 3y=cos(x) with (x) being positive here.*3403

*That is going to be a linear differential equation but we need to do some manipulations to get it in to the right form.*3419

*Remember that form for linear differential equation is Y′ + p(xy)=q(x).*3424

*In particular, there is not any coefficient in front of the Y′, which is what we have here, I’m going to divide that away to start, Y′ + 3/(xy) = cos(x)/x.*3434

*That is why we are given the condition (x) is positive, it allows me to divide by (x), I do not have to worry about dividing by 0 there, that is really all we use that condition for.*3450

*Now I’m going to use my integrating factor strategy for linear equations, my i(x)= (e) to the integral of p(x) d(x) and my p(x) is whatever is in front of the y.*3462

*That is the p(x) right there, in this case the p(x) is positive 3/x, I get (e) to the integral (3/x d(x)).*3482

*The integral of 3/x is just 3 natural log(x), I do not need to add (+c) when I’m just finding the integrating factor.*3497

*A lot of people would like to say that is 3x because it is (e) to the 3 log (x), not true.*3506

*You can not cancel (e) to the natural log until you get rid of that 3 in between them, so I’m going to make that into an exponent on the (x).*3512

*(e) to the natural log of (x) ^{3} and this is just x^{3}.*3519

*What you do with that integrating factor is you multiply both sides by whatever you got.*3526

*I’m going to multiply both sides by x ^{3} and I’m going to get x^{3} Y′ + (3/x × x^{2}) is 3x^{2}, y= x^{2} × cos(x).*3533

*The point of using that integrating factor is that the left hand side is supposed to look like a derivative.*3549

*In this case, it looks like the derivative of x ^{3} × y, the reason for that is because if you expand out the derivative of x^{3} × y using the product rule,*3557

*You get x ^{3} × the derivative of (y) + (y) × the derivative of (x)^{3}, so it really does check there.*3568

*It is always a good strategy to check when you are at this step in any linear differential equation because what it does is it just make sure that you did all the previous work right.*3575

*It is really easy to make mistakes through this process, it is good to check and make sure that the derivative of x ^{3}y really is equal to what you had on the left hand side.*3587

*In this case is does work, this is still equal to x ^{2} cos (x) and in order to undo that derivative we want to take the integral of both sides.*3598

*We get x ^{3}y the integral of the derivative is just the original thing is equal to x^{2}cos(x) or the integral of x^{2} cos (x) d(x).*3608

*In order to integrate that, I have to use parts and I’m going to use my tabular integration trick that I taught you back in the calculus BC lectures here on www.educator.com.*3622

*You can look this up on this lectures if you like, remember the trick is to take derivatives of the left hand side until you get to 0.*3634

*The derivative of x ^{2} is 2x, derivative of 2x is 2, derivative of 2 is 0, then you take integrals of the right hand side.*3650

*The integral of cos(x)=sin(x), the integral of sin(x)=-cos(x), integral of –cos(x)= -sin(x).*3655

*Then I cross multiply down this diagonals and I put alternating signs plus, minus, plus, and I’m ready to write the answer to my integral.*3665

*It means you multiply down this diagonal lines, you will get x ^{2}sin(x) + 2x cos(x) – 2 sin(x).*3677

*I have adjusted my integrals, now is the time to add my arbitrary constant, the key is you add it this time and the reason is because we still have not finished solving for (y).*3692

*As we solve for (y), we are going to do some algebraic manipulations and the (c) is going to be tangled up in there algebraic manipulations.*3703

*You have to let it get tangled up in those algebraic manipulations or other wise it is the wrong answer*3709

*In this case, to solve for (y) I’m going to divide both sides by x ^{3} so I get y=x^{2} sin(x) + 2.*3718

*It looks like I made a small mistake there I forgot to right down that (x), so it is actually 2x cos(x) – 2 sin(x) + (c).*3729

*That is all divided by x ^{3} because I was trying to get rid of that x^{3} on the left hand side.*3750

*That is as far as I can take it for this one, the reason is because I do not have an initial condition, all I have is the differential equation.*3756

*If I had an initial condition I would use that to find the constant, I would use that at this step.*3768

*Let me write that down, you would use the initial condition if it is given to you to find the value of (c).*3773

*You can narrow that (c) down to a particular number if you have that initial condition but in this case we did not have an initial condition so we just stop here with our general solution.*3793

*General solution means that it has an arbitrary constant in the answer.*3805

*Let me recap the steps here, I was remembering my generic form for a linear differential equation, it does not have anything in front of the Y′.*3813

*It is not a 0 there, let me not suggest that supposed to be a 0 but it just does not have anything there, it is like its multiplied by1.*3823

*In this case we have an (x) in front of the Y′, the first thing I have to do right away is divide everything by (x).*3831

*I divide this (x) away, at least away from the Y′ term, that means it shows up in the denominator over here 3/x and cos(x)/x.*3837

*Now I can use my generic solution method for linear differential equations which is to use the integrating factor, which is (e) to the integral of p(x).*3847

*That p(x) is the 3/(x), it is whatever in front of the Y if there is a negative sign, you got to include that as well.*3857

*In this case, there is no negative sign so we have (e) to the integral of 3/x, the integral of 3/x is 3 natural log(x).*3864

*Before I can cancel the natural log I have to move that 3 over to be an exponent.*3875

*I get x ^{3} or (e) to the natural log x^{3} but the (e) in the natural log now they do cancel, I get x^{3}.*3880

*I take that and I multiply that by both sides of the equation and that is how I get x ^{3} Y′ + 3x^{2}y=x^{2}cos(x).*3887

*The point of that is that the left hand side is the derivative using the product rule of x ^{3}y.*3900

*We are really using the product rule there and because it is a derivative of something I can integrate both sides.*3908

*Integral of x ^{3} Y′ is just equal to x^{3}y and on the right I have the integral of x ^{2} cos(x) which is a little nasty.*3915

*I’m going to need integration by parts by that but I have my little tabular method that I have learned back in the calculus 2 or calculus BC lectures here on www.educator.com.*3925

*Here is my tabular integration method, I’m taking derivatives of x ^{2}, so I got down the 2x, 2, and 0.*3936

*I’m taking integrals of cos(x), the integral of cos is sin, the integral of that is -cos, the integral of that is –sin.*3945

*Then I multiply down these diagonal lines attaching alternating signs as I do it, I’m multiplying alternating signs on.*3952

*I get x ^{2} sin(x) I see I have 2 negatives here so that gives me + 2x cos(x) – 2 sin(x).*3961

*It is very important that you have the constant when you do the integration which is right now, I put a constant on there.*3972

*Because I have x ^{3}y, I want to solve for (y) so I just divided that x^{3} in to the denominator there.*3979

*If I have an initial condition I would use that to find the constant but since I do not, I just stop here and I present my general solution to my differential equation.*3987

*That is the end of this lecture on linear differential equations, we got a whole lot more interesting material to cover in differential equations.*3999

*This is just the beginning of the topic, I hope you will stick around and sign up to see the other lectures on differential equations.*4005

*We are going to talk about separable differential equations in the next lecture.*4013

*We are getting in to all kinds of other topics, systems of differential equations, partial differential equations, second order differential equations.*4017

*We are going to graph slope fields and direction fields, there is all kinds of exciting material for us to explore together and I really hope you will be a part of it.*4025

*In the mean time, my name is Will Murray and you are watching the differential equations lectures on www.educator.com, thanks for joining us.*4034

1 answer

Last reply by: Dr. William Murray

Mon May 8, 2017 9:42 AM

Post by Emanuel Fonseca on May 6 at 02:07:44 PM

Im doing turning machines and I could not find anything on this website to help me could you please help me with this problem

Unless otherwise stated, M and N are TM’s, G and H are CFG’s; The alphabet ? is {0.1}. Decide whether each of the following sets is (A) computable, (B) c.e. but not computable or (C) not c.e.

I think its C not C.E

{?G?: L(G) is infinite.}

1 answer

Last reply by: Dr. William Murray

Mon Jan 9, 2017 10:11 AM

Post by Jim Tang on January 5 at 02:33:17 AM

hey will! i was wondering if you can compare the rel difficulties of multivar calc and diff eq as i just finished my multivar calc class last semester. excited to learn diff eq this semester!

2 answers

Last reply by: Dr. William Murray

Mon Jul 13, 2015 11:20 AM

Post by Kamal Gaal on July 11, 2015

Excellent lecture Dr. Murray. Just a slight overlook in the last example. The derivative of cosx = -sinx. Just quick question Dr. murray, if I cover all the material on math and physical on educator.com Is that going to be enough to do well on electrical engineering at university? Thanks for all that you do.

1 answer

Last reply by: Dr. William Murray

Wed Jul 1, 2015 8:46 AM

Post by Guanzhong Du on June 23, 2015

Hello Professor Murray,

In my calc class, I learned that the antiderivative of 1/x is ln |x|, the natural log of an absolute value. In this lecture, however, you did not include the absolute value sign. For example, when you integrated 3/x, you wrote 3 ln (x) instead of 3 ln |x |. Why is it valid to drop the absolute value sign when solving ODEs?

Thanks! I really enjoy watching your lectures!

1 answer

Last reply by: Dr. William Murray

Fri Feb 27, 2015 1:05 PM

Post by David LÃ¶fqvist on February 26, 2015

Slide 1, note 1 "we think of y and y' as variables... (not x and y)" is this a typo or do you mean something else?

1 answer

Last reply by: Dr. William Murray

Mon Dec 15, 2014 1:19 PM

Post by Denny Yang [ Mod â™• ] on December 13, 2014

Definitely a 5 Star lecture. Everything was crystal clear, and I enjoyed the watching this video. I wish you taught at my campus! (UCSD)

2 answers

Last reply by: Dr. William Murray

Fri Sep 5, 2014 12:58 PM

Post by Bob Lowe on September 4, 2014

At 61:30, shouldn't it be x^2sinx + 2xcosx -2sinx?

3 answers

Last reply by: Dr. William Murray

Mon Aug 25, 2014 6:36 PM

Post by Timothy Davis on August 20, 2014

Hello Dr. Murray,

When you rewrote the equation at about 1:16 into the video, you rewrote it without the x. (y' + Py = Q). Why did you leave the x out?

Original equation: y'(x) + P(x)y(x) = Q(x). I think I'm confused about the whole concept of linearity. I really didn't quite get your explanation for it. Could you explain further?

1 answer

Last reply by: Dr. William Murray

Thu Mar 27, 2014 5:04 PM

Post by Gregory Gutierrez on March 22, 2014

You are an amazing teacher! Can you please teach your own version of Multivariable Calculus on here?

1 answer

Last reply by: Dr. William Murray

Tue Mar 4, 2014 4:56 PM

Post by Timothy Davis on March 1, 2014

This question isn't pertaining to this video. However, I need to learn Exact and Bernoullis ( I think I spelled it right!) differential equations. I don't see them on the syllabus, unless I overlooked it. Do you cover these two topics?

1 answer

Last reply by: Dr. William Murray

Tue Jan 7, 2014 12:15 PM

Post by Derek Nickerson on January 3, 2014

This is excellent. I've never had this topic explained so clearly! Thank you!

1 answer

Last reply by: Dr. William Murray

Tue Dec 17, 2013 5:55 PM

Post by Edward Arreguin on December 11, 2013

In your calculus BC lecture on integration by parts you said that tabular integration doesn't work with trig functions. Why did it work here on the last example?

1 answer

Last reply by: Dr. William Murray

Fri Sep 27, 2013 5:27 PM

Post by michael morris on September 26, 2013

Do you give a lecture on exact equations? I cant seem to find it on your table of contents.

1 answer

Last reply by: Dr. William Murray

Fri Sep 27, 2013 5:18 PM

Post by Eddy Noboa on September 24, 2013

Hello Dr. Murray. Sorry for the confusion I made from the last comment. What I meant to say was at 16:06 you pull out the number 2 to behind the Integral. So, from x^2 inside the Integral on the next line you placed the 2 behind the integral and then the x goes away and instead you placed after the integral u e^u, why. And wha happened to the x and where does the u comes from.

3 answers

Last reply by: Dr. William Murray

Wed Jan 11, 2017 10:23 AM

Post by Eddy Noboa on September 21, 2013

hello Dr. Murray. At 12:04 you said that is going to pull out the x^2 as 2 times u, or 2 integral u. Can you explain why.

3 answers

Last reply by: Dr. William Murray

Fri Sep 27, 2013 5:11 PM

Post by Eddy Noboa on September 21, 2013

hello Dr. Murray, to better put my question. When multiplying I(x) into the equation, on y'(x), it was written; e^x^2/2 times y'. My question is where is the x on the y'(x). Since I(x) supposed to be included in the equation because it is written; y'(I(x))+ x(I(x)y=x^3 I(x). I think is should be like this; y'I(x)x + x(I(x))y=x^3(I(x)

1 answer

Last reply by: Dr. William Murray

Sun Sep 22, 2013 8:51 AM

Post by Eddy Noboa on September 21, 2013

Hello Dr.Murray. Great video. I have a question; at 12:05, when multiplying I(x)to both side of the equation. You first started Multiplying the y'x where you replace x with e^x^2/2 times y' which I think is because the x is replaced by e^x^2/2. Now after the plus sign, we have xy=. My question, if you replaced on the y'x the e^x^2/2 with the x. I think It should be this way: e^x^2/2 times y only but you have it as; x e^x^2/2 times y, I feel that there is an extra x because if you replaced that one x before the + sign. After the plus sign, you are replacing the x by e^x^2/2 but yet there is another x, I am confused please explain if you can. Thanks

1 answer

Last reply by: Dr. William Murray

Fri Sep 6, 2013 12:47 PM

Post by Timothy Davis on September 5, 2013

Hi Dr. Murray! As usual, your videos are great! However, when you were multiplying e^x^2/x by y'x you only included y'. Why is that? This was around 12:17 into the video on first order linear equations.

1 answer

Last reply by: Dr. William Murray

Thu Jul 18, 2013 8:38 AM

Post by KyungYeop Kim on July 13, 2013

Hi Dr. Murray, your lecture is great and clear, but I have a question. Is it a legit introductory course to calculus for a beginner? I took pre-calculus last year and this is the first time getting into calculus. I wonder if I could start learning calculus with this lecture set. (What would you, considering I'm a total novice, recommend that I start with? a book or anything would be appreciated) Thank you.

1 answer

Last reply by: Dr. William Murray

Mon Apr 8, 2013 7:57 PM

Post by William Dawson on April 7, 2013

Excellent! Wunderbar!